Impact Resistance Test in Home Furniture

Impact tests are those that assess the strength of the cabinet against the occasional impact that will happen during its lifetime.

HEIGHT IMPACT

Before determining the impact point is placed a sheet of foam, from which we determine the drop height of the impactor. Then, place a second sheet of foam.

The test method is performed according to the following process: first determine the loading point of the seat (point on the seat in the vertical center of mass of the user’s mass) then place a sheet of foam to determine the drop from of it until the impactor, then place a second sheet of foam between the first and the impactor and finally dropped freely impactor with a mass of 25 kg. This process is repeated 10 times and any other position that is considered of importance. If it is a product intended to be used by more than one person, try a square from one end and a central place.

A test which simulates the same is based on American standards ANSI / BIFMA: the test procedure is to drop freely a mass of 102 kg that hits the seat from a fixed height of 152 mm measured from the uncompressed seat to the base of the bag. After it, the test is repeated, this time with a bag loaded with 136 Kg. After the first impact of the seat, it must to be fully operational and after the second must have been produced no sharp breaks.

HEADS RESISTANCE TESTS

Impactor is situated to the starting position of test and control the test parameters, such as time between impact and stop in case of breakage.

Another way to test the seams and seat structure is applying energy from impact test on backrests and armrests. To test is essential to block the movement of the seat sliding and impact in the center of the upper back (or at the rear edge of the seat if it is backless chairs) or on the side of the armrest in the position considered most unfavorable. A total of 10 impacts at each element, from the outside in, with the impact hammer, that consists of a cylindrical head of 6.5 kg mass attached to a steel tube 38 mm in diameter with a thickness of 2 mm and a length of 1 m to the low friction joint. The angle of fall of the hammer to the achievement of impact varies between 38 º and 68 º depending on its intended use the seat.

TABLE IMPACT TEST

In the studies of impacts on tables is turned on the strength of the table to occasional impact when placing things on top of it. The test consists of dropping the impactor freely over the top of the table 10 times, following the same steps that in the case of impacts on the seats of the chairs. The drop height varies between 180 and 240 mm, in the case of tables with glass top security than the drop height varies between 240 and 300 mm, in this case, instead of using two layers of polyether 25 mm thick, using a polyether foam 100 mm thick.

BATHROOM AND KITCHEN FURNITURE IMPACT TEST

It determines the resistance to hard charges located on the drawers of kitchen and bathroom. The test consists of dropping a steel ball of 42.8 mm diameter and a mass of 324 g from a height of 600 mm above the bottom of the drawer when the drawer is 2 / 3 of its total opening. At the end of the test evaluates the possible flaws that affect the mechanical strength or functionality. The fronts of the kitchen and bathroom cabinets (doors and drawers) are impacting the central part of himself with a leather ball with a diameter of 200 mm and a mass of 5 kg from a height of 500 mm. In the case of lower cabinets with doors, are tested after being closed and opened 45 degrees and found that there are no breakages and that the elements continue to function correctly.

TEST IMPACTS ON CHILDREN’S FURNITURE

The impact tests on children and juvenile furniture ensure durability of the model at such issues as the base (cribs), trays (chairs), mattress, safety barriers, etc.., Special mention by the type of furniture and what type of audience that will be use it, where any defect in design or accidental breakage of any component can cause a serious accident.

Test consists on impacts on both the mattress and in the barrier. The base of the cradle hits a thousand times in each of the six points identified by the European Standard. Its dropped freely and avoid the impactor rebounds (10 kg device with a tip mass in the opposite hemisphere and a guide to maintain the vertical and secure the point of impact) from a height of 150 mm between the base and the impactor is placed a cushion with a density test (35 + 2) kg / m3 and a thickness of 60 mm, dismissing every 5 completed trials.

To test the resistance of the head and sides of the cribs, the impactor is placed lateral (pendulum of steel cylindrical head covered with a layer of rubber 10 mm thickness and a hardness between 76 IRHD and 78 IRHD with a total mass of 2 Kg) ready to hit the crossbar or side 10 times from outside and the next rung 10 times from inside to hit all the bars (or all points determined whether it is solid side). The impact is made on a point at a height of 200 mm below the top edge of the side, dropping freely side impact from a horizontal position. Each and every one of the corners of the cribs are impacting five times inside and five on the outside as close as possible to the top edge impactor dropping freely from a 60-degree angle.

Berths are also tested by impacts. The bases are tested on the two beds and the steps of the staircase to the upper bed. The impacts on the bunk bed frame are made on seven points from a height of 180 mm measured from the top of the mattress test (in this case, with a density of (30 + 2) kg / m3 and 100 mm thick ). The impact on the steps of the staircase leading to the upper bed is performed ten times in each of the following: on the steps above, below and you’re closer to the center, hitting the center and as close to one side as possible, is dropped from 150 mm impactor (consisting of a bar of 1400 mm, which places a mass of 15 kg, finished in a steel plate of 100 * 100 * 6 mm).

Interior Design Home Decorating – Trendy Living Room Coloring Ideas

Synchronizing Colors and Themes

The first thing to do after you have decided which decorating style theme you will use for your living room in your new home or while renovating your existing home, you have to decide which color scheme you will use. You have to keep in mind to color coordinate with the color theme of your furniture, upholstery, furnishing accessories, floor covering, carpets, etc.

Another option is to begin with the furniture and coordinating paint colors with it. You may try to start with the major piece of furniture in the room or the room’s central point. Either use balancing colors or make the focal point stand out with something light around it.

Choosing Classic Colors That Still Works

The most fashionable color today is still the various tone of white or off-white because it makes the room look very large and also makes small pieces, like lamps and tables, look larger. White also adds light to your living room while helping to keep it cooler in the summer months. However, too many rooms with white walls tend to make your home look sterile or generic, not to mention the time you’ll have keeping your walls clean.

Great Colors Options

A great idea would be to add hints of colors to complement your white walls. You can use a little tan for your trim some tones in light green or blue, or a tan or taupe accent wall.

Brown: There is nothing like the shades of brown to bring out warmth and blend in nicely with just about everything. But be cautious to use brown colors in a small living room as it may dominate the room, oppressing the colors of your furniture and accents. Shades of Tan or taupe will work, although.

Reds: The color Red is a classic shade because they are so bold, vivacious and daring. Reds work especially well with light colored furniture, making it stand out even more. Still, people like to use red as an accent color with just a hint of that shade, more than a main wall color. But nowadays, a few people dare t o paint their walls red too.

Blues: Blues are cool and most often related with French country, Victorian or marine designs. In the more traditional uses, blue is great for expressing formality due to its consoling nature. Nonetheless, blue suggests countless different hues that can change outlook as well as atmosphere.

Learn from what you have read and got the basic ideas from different places and start experimenting. There are several excellent professionals who also provide color consultations to their customers. Hopefully, these few tips will help you find your own living room paint colors and get you on your way to creating the living room of your dreams.

How About Shopping at Home? – Furniture in Hyderabad

What you see – If you love being at home, you will love shopping “at home” as well. That’s what we saw and felt at this home decor store – at home. Now when you enter this shop, you will also see chivalrous security personnel open the lift doors for you. That’s a pleasant gesture, alright. And these are the same personnel who will stop you when you leave so as to check your bill, put a stamp on it and thank you for visiting the store. So these are the people you will see even when you step out of the store.

What you get – The first floor of this four-storied plush showroom is devoted largely to home accessories. These include imported hand-made paintings, glassware, dinnerware, a huge collection of artificial flowers and fruits, modish vases in all shapes and sizes, table decor, candles, luxury bathroom sets and splendid clocks from Opal (priced above Rs. 1,000, but worth it).

Metal puja thalis with God figurines priced at Rs.1,010 are something that you should look for. These are durable and have an ethnic look because of the exquisite carvings. As far as the beautiful and imported hand-made porcelain figures are concerned, you just can’t take your eyes off them. These come at a cost of Rs. 4,000 and above.

The next three floors at this store deal in furniture, furnishings, flooring and lighting. Here you can find beautiful bed covers from Portico New York, an international home decor and furnishings company. These are priced a little above Rs. 500. They also have a special kid’s bed collection (Rs. 369-469) besides quilts, cushions, towels, snooze pillows etc. Well-designed leather and wooden dining tables from Malaysia are worth a dekko here and so are the splendid lampshades and lights that can transform the look of your house.

There’s more. On the top floor you have virtual bedrooms designed for you with beds, side tables, beanbags, almirahs, sofas and dressing tables. Queen size and king size beds are priced between Rs.19, 900 and Rs. 42, 900.

The verdict – A great collection of home accessories is what this store has. These are unique and make splendid gift items. So make sure you visit this store if you are looking for something exquisite. Apart from that, what we also liked was the fact that they do not charge for home delivery.

Accessible Design Home Modifications For Seniors and People With Disabilities

One out of every two people in the United States has some type of disability that limits their daily living. The disability could be from a stroke, a fall, or another age-related difficulty. With approximately 70 million people in this age category, it presents a large segment of the population.

For most seniors, staying at home as they age (aging-in-place) is a big priority. More than 90 percent of persons surveyed age 65 and older would prefer to stay in their current residence as long as possible.

Accessible Home Modifications allow people to stay at home longer instead of moving to a care facility. People that stay in their own home have increased self-esteem, see friends and family members more often, and are generally happier. A caregiver may be needed but this is a thriving industry and help is just a phone call away.

What Can Be Done to Make a Home Accessible and Barrier-Free?

Make the Bathroom Safer

Most accidents in the home happen in the bathroom. Making sure the bathroom is safe and accessible is probably the first place to examine.

Grab Bars should be placed inside the shower and directly outside the shower entrance. They can also be placed next to the toilet.

Raise your toilet with a Toilevator toilet spacer. This device goes underneath the base of the toilet and raises it up 3.5 inches. This is safer and cleaner than using a toilet elevator on top of the seat.

Add Non-Slip Shower Strips to the floor of the shower or bathtub. These are inexpensive and easy to install and prevent slipping while standing in the shower.

Living Room and Bedroom

A lot of time is spent in the living room and bedroom standing and sitting. Make sure carpets and rugs are flat to avoid tripping over them.

Provide ample lighting, especially near stairways, to avoid tripping or walking into things.

Devices such as Couch Canes, Super Poles, and Bed Canes make it easier and more stable for standing and sitting. They also take the pressure off the knees.

Furniture Risers (sofa risers) can be placed under the legs of sofas, chairs, or beds to lift them up a few inches making it easier to stand or sit.

The Kitchen

Accidents in the kitchen many times stem from reaching up high in cabinets.

Use a Step Stool With a Handle for stability and to make it easier to reach items.

A Portable Reacher can grasp items high up in a cabinet.

Outside the Home

Make sure walkways are free of cracks and stairs are lighted for night. Mark them with colored tape or paint so it is easier to see the steps or changes in elevation.

Handrails along walkways or near steps and doorways give something to hold onto in problem areas.

There are numerous solutions for making a home safer and more accessible. Many of them can be done simply by looking around and making minor adjustments. Others are bigger jobs that require a contractor, such as adding a stairlift.

Check for contractors that are CAPS (Certified Aging in Place Specialists) certified to ensure they are qualified to do the work.